No products
Prices are tax included
The Mira Vigour Manual is an all-in-one power shower with a built-in pump, delivering up to 12 litres per minute from a gravity fed hot and cold supply. Separate manual flow and temperature controls. For tank-fed systems only — not suitable for combi boilers or mains pressure. The thermostatic version is 1.1532.353.
Mira Vigour Manual Power Shower – White & Chrome
If your home runs off a tank in the attic and a cylinder in the hot press, gravity alone rarely gives a satisfying shower — particularly in a bungalow or a top-floor bathroom where there's little height between tank and outlet. The Mira Vigour Manual is an all-in-one power shower with an integral mains voltage pump built into the unit, delivering up to 12 litres per minute without needing a separate pump in the hot press.
Manual means the temperature is set by hand, and stays where you put it. Separate concentric controls for flow and temperature let you fine-tune the shower and then simply turn the flow up or down without disturbing the blend. It's the simpler, more affordable of the two Vigour models, and for a household where the same person showers at the same setting every day it does everything that's needed.
⚠️ This is a power shower, not an electric shower. It mixes and pumps your existing hot and cold water and has no heating element or kW rating. It requires a cold water cistern and hot water cylinder, and is not suitable for combi boilers or mains pressure systems.
| Specification | Details |
|---|---|
| Brand | Mira Showers |
| Range | Vigour |
| Product Code | 1.1532.354 |
| Model Designation | B85M |
| EAN | 5013181037388 |
| Type | Manual Power Shower |
| Control Type | Manual |
| System Required | Cold water cistern and hot water cylinder |
| Not Suitable For | Combi boilers, mains pressure systems |
| Flow Rate | Up to 12 l/min |
| Supply Voltage | 230V ± 10% |
| Supply Rating | 3 amp |
| Terminal Block | Maximum 2.5mm² |
| Water Entry | Left — rising, falling, rear |
| Cable Entry | Left — rising, falling, rear |
| Inlet Connections | 15mm dual entry push-fit, 28mm pipe centres |
| Outlet Connection | ½" BSP male |
| Cold Water Range | Up to 25°C |
| Hot Water Range | 50°C – 65°C max (recommended) |
| Minimum Maintained Pressure | 0.01 bar (100mm head) |
| Maximum Maintained Pressure | 0.5 bar (5 metre head) |
| Maximum Static Pressure | 1.0 bar (10 metre head) |
| Dimensions | 310 × 210 × 130 mm |
| Showerhead Diameter | 90 mm |
| Hose Length | 1.25 m |
| IP Rating | IPX4 |
| Colour | White & Chrome, gloss |
| Guarantee | 1 year |
Mira Showers
Track your order
Insert your tracking number :