No products
Prices are tax included
EPH UFH10 10 Zone Underfloor Heating Wiring Centre
ESI ESRTE2 Electronic Central Heating Room Thermostats 10°C - 30°C
4 Zone 230v Underfloor Heating Wiring Centre UH4
8 Zone 230v Underfloor Heating Wiring Centre
The Heatmiser Boost v2 is a surface mount repeater for the Neo and RF systems, extending communication between RF thermostats, wiring centres, neoStats, neoAir v3 and the neoHub Gen 2. Hard wired for reliable performance, it is the fix for dropped signals in larger properties or where thermostats sit far from the hub.
Manual Dial Thermostat with Display - Heatmiser DS1-L v2
Heatmiser Edge - Multi Mode Programmable Room Thermostat
HEATMISER EDGE-HC MULTIMODE FAN COIL THERMOSTAT WITH MODBUS COMMUNICATION
Multi Mode Programmable Touchscreen Room Thermostat
Heatmiser Multi Mode Programmable Touchscreen Room Thermostat Carbon
The Heatmiser neoPlug is a 13A smart plug for the Neo system, letting you control any appliance manually or on a schedule through the neoApp. It doubles as a wireless repeater for the neoHub Gen 2, UH8-RF v2 and RF Switch v2, extending signal range without any wiring. Not compatible with neoStat WiFi or neo MiniHub.
The Heatmiser neoAir v3 in glacier white is a battery powered wireless programmable thermostat, ideal where no thermostat wiring exists. It runs on 4 AAA batteries and surface mounts anywhere in the room. Requires an RF Switch v2, UH8-RF v2 or neoHub Mini receiver — not included.
The Heatmiser neoHub Gen 3 is the gateway that turns your neoStats into a full smart heating system. It connects to your router by Ethernet and supports up to 32 neo devices, with app control via the neoApp plus Apple HomeKit, Alexa, Google Home and IFTTT. Adds NFC pairing and 4-week per-zone history.
The Heatmiser neoStat v3 in sapphire black is a 230V programmable thermostat with illuminated soft touch keys and a proximity sensor. Upgraded hardware gives a stronger mesh signal and better range than the v2. Requires a neoHub Gen 2 or newer for smart control — not compatible with the original Gen 1 hub.
The Heatmiser neoStat v3 in glacier white is a 230V programmable thermostat with illuminated soft touch keys and a proximity sensor. Upgraded hardware gives a stronger mesh signal and better range than the v2. Requires a neoHub Gen 2 or newer for smart control — not compatible with the original Gen 1 hub.
Heatmiser NeoStat Programmable Thermostat White Glacier White NeoStat, Programmable Thermostat The neoStat is a 12v powered thermostat with a volt free switch.The neoStat communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating. Our 12v neoStat is compatible with the UH8-N Wiring...
The Heatmiser neoStat v3 in platinum silver is a 230V programmable thermostat with illuminated soft touch keys and a proximity sensor. Upgraded hardware gives a stronger mesh signal and better range than the v2. Requires a neoHub Gen 2 or newer for smart control — not compatible with the original Gen 1 hub.
The Heatmiser neoStat-HW v3 in sapphire black is a dedicated hot water programmer with changeover contacts, suited to standard and mid-position Y-plan valve systems. It replaces an existing 230V three-wire programmer, offers 5/2 day, 7 day and 24 hour scheduling with a one-touch boost, and adds app control when paired to a neoHub Gen 2 or later.
The Heatmiser neoStat-HW v3 in glacier white is a dedicated hot water programmer with changeover contacts, suited to standard and mid-position Y-plan valve systems. It replaces an existing 230V three-wire programmer, offers 5/2 day, 7 day and 24 hour scheduling with a one-touch boost, and adds app control when paired to a neoHub Gen 2 or later.
Heatmiser Slimline Programmable Thermostat 230V
No supplier
Track your order
Insert your tracking number :